Product Details:
Payment & Shipping Terms:
|
High Light: | digital tv receiver,digital satellite receiver |
---|
GOSPELL 8-Ch Satellite / Cable Signal Receiver and Decoder
Model No :GC-1803
1: Support up to 8 Channel Satellite / Cable FTA signal receiving
2: IP , ASI or RF input ,Output with AV
3: Professional signal decoding
Product Overview
GC-1803 is a multi channel professional FTA receiver and decoder with broadcast quality launched by GOSPELL. This was designed for demodulating and decoding up to eight unscrambled SD MPEG-2, AVC and AVS programs.
It supports a wide range of input and output options, coming from DVB-S/S2 satellite, Ethernet network and local DVB-ASI interface, allowing it handle any program sources, decoding output via analog composite video and unbalanced or balanced audio interfaces. It is also highly versatile and can decode up to eight channels SD MPEG-2, AVC, AVS programs in one rack unit.
The GC-1803 supports Web browser and SNMP management for local and remote management and maintenances, this can significantly reduce management time and operating expense (OPEX) of operators.
Features and Benefits
Lower OPEX, Improved User Operation Efficiency
- Convenient management and maintenance, supports Web browser and SNMP based management, for local and remote management and maintenances;
- Supports remote software upgrades;
- Front panel control and alphanumeric LCD display;
- Supports export and import configuration file of equipment parameters;
- High reliability and stability: Benefit from its highly reliable hardware and software design; adopts
Lower CAPEX, Highly Cost-effective
- High density: 1RU, up to 8 channels of standard definition video and audio decoding output;
- Versatile functions: supports DVB-S/S2 RF reception & demodulation, Ethernet network and DVB- ASI TS input, unbalanced or balanced analog audio output;
- Multiple video decoding formats as standard configuration, no additional charge for software license, including MPEG-2, MPEG-4 AVC and AVS;
- Multiple audio decoding formats: MPEG-1 Layer II and MPEG-2.
GOSPELL’s third generation motherboard + built-in discrete function module design, for fast replacement of failure function module; multiple protective mechanisms are included, such as power failure memory recovery, over-voltage, over-load, short-circuit protection.
Technical Specifications
RF Input (Hardware Option) | ||
Number of Inputs | 2 x RF Input, 2 x RF Loop Out | |
Connector Type | F-Type (Female, 75Ω) | |
Frequency Range | 950MHz to 2150MHz | |
Input Signal Level | -65dBm to -25dBm | |
Standards |
DVB-S: EN 300 421 DVB-S2: EN 302 307 |
|
Constellations |
DVB-S: QPSK DVB-S2: QPSK/8PSK |
|
Symbol Rate |
QPSK: 2.0Msym/s to 45Msym/s 8PSK: 10Msym/s to 31Msym/s |
|
LNB Power Output | 0V/+DC 13V/18V, LNB short circuit protection | |
TS-over-IP Input (Hardware Option) | ||
Numbers of Interface | 1 x 100/1000Base-T Ethernet | |
Connector Type | RJ-45 | |
Data Format | 7 x 188 Bytes | |
Transport Protocols | TS-over-UDP | |
Addressing | Unicast, Multicast (IGMPv1, v2) | |
ASI TS Input | ||
Numbers of Interface | 1 x ASI Input | |
Connector Type | BNC (Female, 75Ω) | |
Standards | DVB-ASI | |
Data Format | 188 Bytes MPEG-TS packet length | |
Bit Rate | 1.5 to 99 Mbps each | |
Analog Video and Audio Output | ||
Composite Video | 8 x CVBS | |
BNC female, 75W | ||
Unbalanced Audio | 8 x Stereo pairs (R&L) | |
BNC female, 600W | ||
Stereo or Mono mode | ||
Analog Balanced Audio Output (Hardware Option) | ||
Numbers of Interface | 8 x Stereo pairs (R&L) | |
Connector Type | XLR male, 110W | |
Operation Modes | Stereo or Mono | |
Remarks: This hardware option is available for 2RU chassis only. | ||
Video Decoding | ||
Decoding Profile & Level |
MPEG-2 SD: MP@ML MPEG-4 AVC SD: MP@L3 AVS |
|
Resolution& Frame Rate |
PAL: 576i@25fps NTSC: 480i@30fps |
|
Aspect Ratio | 4:3 or 16:9 | |
Audio Decoding Options | ||
Decoding Formats |
MPEG-1 Layer II MPGE-2 |
|
Operation Mode | Stereo or Mono | |
Supported Sample Rate | 32 kHz, 44.1 kHz, 48 kHz | |
Audio Decoding Rate | MPEG-1 Layer 2: 192-384 kbps | |
Network Management | ||
Interface | 1 x 10/100 Base T Ethernet | |
Connector | RJ-45 | |
Management | Web browser and SNMP management | |
Miscellaneous | ||
Front Panel | 3.5’’ LCD with 6 x Control Buttons for 2 line alphanumeric display and parameter settings | |
3 x Dual color LED, for status indications of power, work and Alarm | ||
Rear Panel | 1 x Serial Console Port(via RJ-45 connector) | |
1 x Power Supply Receptacle (AC Input) | ||
1 x Power switch | ||
Power Supply | ||
Input Voltage | 110-240 VAC, 50/60Hz | |
Power Consumption | 30W(Maximum) | |
Environmental | ||
Operating Temperature | 0℃ to 45℃ (32℉ to 113℉) | |
Storage Temperature | -20℃ to 80℃ (-4℉ to 176℉) | |
Operating Humidity | 90%, non condensing | |
Mechanical | ||
Product Dimensions (W x H x D) |
1RU: 483mm x 44.5mm x 450mm 19’’ x 1.73’’ (1RU) x 17.7’’ |
|
2RU: 483mm x 89mm x 450mm 19’’ x 3.5’’ (2RU) x 17.7’’ |
||
Product Weight |
1RU: 3Kg (6.6 lbs) 2RU: 6Kg (13.2 lbs) |
Ordering Information
1RU Hardware Options | ||
Hardware Codes | Descriptions | |
GC-1803-S | 1RU, 1 x ASI input, 2 x DVB-S/S2 input, 8 x CVBS and Unbalanced Stereo Pair(R&L) output | |
GC-1803-P | 1RU, 1 x ASI input, 1 x 100/1000Base-T input, 8 x CVBS and Unbalanced Stereo Pair(R&L) output | |
GC-1803-SP |
1RU, 1 x ASI input, 2 x DVB-S/S2 input, 1 x 100/1000Base-T input, 8 x CVBS and Unbalanced Stereo Pair(R&L) output |
|
2RU Hardware Options | ||
Hardware Codes | Descriptions | |
GC-1803-BS | 2RU, 1 x ASI input, 2 x DVB-S/S2 input, 8 x CVBS and Balanced Stereo Pair(R&L) output | |
GC-1803-BP | 2RU, 1 x ASI input, 1 x 100/1000Base-T input, 8 x CVBS and Balanced Stereo Pair(R&L) output | |
GC-1803-BSP |
2RU, 1 x ASI input, 2 x DVB-S/S2 input, 1 x 100/1000Base-T input, 8 x CVBS and Balanced Stereo Pair(R&L) output |
For More Information
Please visit our website: or contact your local sales representative:
|